Synthetic Fast Enamel CV Paint 5Ltr

Fast Enamel is ideal for Plant Hire, tractor, and machinery.

A 2 to 3 hour dry high gloss enamel for application by spray, or brush on small areas. Particular benefits over other faster drying enamels are that it has a low odour. A longer wet edge, higher flash point, and can easily be re-coated.

Used on machinery, fixed plant, construction equipment, sheet metal and general fabrication work, and larger items which are painted in open shop conditions.

ARTICLES – that are not part of a building structure (and are therefore outside the scope of the building products VOC Product Directive)
Used as a fast drying refurbishment or maintenance brushing enamel for items such as :
INSIDE BUILDINGS Machinery, fixed plant, movable equipment, fork lift trucks, trolleys, frames, guards etc
OUTSIDE BUILDINGS Tanks, pipework, process plant, towers, bridges, or any structure which is not part of a building

See also the Manor supplementary information sheet ‘Guide to the UK VOC legislation’ to understand how the VOC content of a coating determines its suitability for use in any application.

Surfaces must be dry sound and free from dirt, dust and grease.

For spray application prime with Manor Fast Primer or similar, and for brush application prime / undercoat with Manor Metal Primer or CV Primer Undercoat. Previously painted glossy surfaces should be lightly abraded prior to application to promote adhesion. Any non-ferrous metals must be pre-treated with Manor Wash Primer or Manor 1 Pack Etch Primer CT

Gloss finish available in an extensive range of BS, RAL and other colours.

Also avilable in Semi-gloss or Semi-matt finishes are also available to order.

Technical data sheet click here

Colour Chart and Reference for BS381C Click Here
Colour Chart and Reference for BS4800 Click Here
Colour Chart and Reference for RAL Click Here