Lechsys 29158 1K Aerosol UPVC Matt paint 400ml

DESCRIPTION

One-pack acrylic enamel for matt finishes. Aerosol Can 400ml

Colour Chart and Reference for BS381C Click Here
Colour Chart and Reference for BS4800 Click Here
Colour Chart and Reference for RAL Click Here

Data Sheet

USE

Suitable for painting industrial manufactured items and in particular for painting directly onto PVC, ABS and rigid polystyrene (PS).

CHARACTERISTICS

Easy application Fast air drying Excellent appearance Very good direct adhesion to PVC and ABS Direct adhesion on PS (no foam polystyrene) if diluted with specific thinner (00587 PS THINNER). Direct adhesion on methacrylate (Plexiglas), only after preliminary tests.

SUBSTRATE PREPARATION

ABS/PVC/PS: degrease carefully with 00617 PLASTIC CLEANER.

Steel and industrial manufactured items: apply in D/D and W/W system on epoxy, epoxy-vinyl, epoxyacryl and synthetic primers from the Lechsys range (except LS103 (29103) that gives an unstable adhesion to the topcoat overapplying).

APPLICATION Spray application. Mixing ratio:

weight and volume LS158 ACRYL 1K MATT (derived from binder 29158) 1000 parts 00824 (Slow)-00825 (Standard) LECHSYS UNIVERSAL THINNERS or 350-450 parts 00587 PS THINNER * 500-600 parts * specific thinner for direct adhesion on PS

Spray viscosity at 20 °C: 18-20” DIN 4 Recommended spray temperature: above 5°C under 30°C Ø Air cap: 1,4 mm Air pressure: 4 Atm Number of coats: 2 Suggested film thickness: 30-40 µ

LECHLER S.p.A. 22100 Como Italy – Via Cecilio,17 Tel. +39/031/586.111 Theoretical coverage: 1kg mixture = 7 m² at 40 µ 1 l mixture = 7,5 m² at 40 µ V.O.C. (on average) of the product ready for use: ~ 650 g/l

DRYING TIME

Air drying at 20°C Dust-free: 5-7 min. Handling: 10 min. Through-drying: 4 h

Low bake at 60°C: 20 min.